Clever Drop Sprinkler

If you like your Wobble-Tee you will love the Clever Drop! The 100% Australian made water efficient Clever Drop Sprinkler is designed to work at various pressures (35-350KPA) covering an area of up to 8m in diameter. The base is adjustable to ensure even distribution across sloping or uneven surfaces and comes with four pressure regulating discs of various sizes.

• Great performance at pressures between 5-50 PSI using pressure regulating discs, covering an area upto 8m in diameter


• Designed for Australian conditions with even distribution of water. Sprinkler components are manufactured from high grade UV stabilised plastics.


• Removable filter allows use with a variety of water types - dam, river, town, recycled effluent re-use and grey water


• Add-on-ability to run more than one sprinkler from the same tap

These discs can be removed from the base and used to control the watering diameter to ensure consistent, even distribution of water preventing evaporation loss and wind drift due to misting therefore applying the water like slow soaking rain. The Clever Drop Sprinkler is flat packed to protect the moving parts during distribution.

To get started, simply cut the cable ties, gently flex the base and rotate the sprinkler to upright position and ensure the teeth are correctly engaged as you release the base.

Removable end cap allows for an additional hose connector to be added to the base, enabling the operation of multiple sprinklers from just one tap. Four discs of varying sizes are provided for use in areas of high water pressure to control smaller watering diameters and ensure a consistently even distribution of water. These can be easily inserted under the removable sprinkler top. Diameters may vary with different water pressures.

The upright operating position can be adjusted for use on uneven surfaces, such as tiered gardens. Gently flex the side skids of the sprinkler base downward and rotate the centre turret to the desired position, then ensure the teeth are correctly engaged as you release the sled base. Use for roof cooling on sheds and bird aviaries. For a temporary application just run the hose over the roof peak and the sprinkler sits vertically on the corrugated iron.

For permanent installation run the sprinklers and hose across the corrugated iron securing the sprinkler through the holes provided using the existing roofing tek screws. Use 20mm metal pipe saddles to hold the hoses in place using the existing roof screws.