WHAT IS COLOURGUARD PLUS?
Lawn Solutions Australia’s ColourGuard PLUS is a 100% organic and non-toxic grass colourant that now has the addition of a liquid fertiliser. This combination of a robust blend of vital micronutrients with an organically derived pigment will improve both the appearance and health of your lawn at any time of year. ColourGuard PLUS is easy to apply, plus one application gives your lawn up to 3 months of natural green colour. Say goodbye to brown lawns in winter and dry-looking lawns in summer!
THE COLOURGUARD PLUS DIFFERENCE
ColourGuard PLUS is NOT a lawn paint. ColourGuard PLUS is an organic turf pigment blended with a liquid fertiliser that is naturally absorbed by the grass leaf blade. This means you get to keep the beautiful natural green colour for up to 3 months, whilst giving your lawn a dose of vital micronutrients.
PROTECT YOUR LAWN
Think of ColourGuard PLUS like a sunscreen for your lawn: it screens out the harmful UV rays, but still allows filtered light to hit the leaf blade. ColourGuard PLUS protects your lawn during even the hottest summer months.
THE ‘NEED TO KNOW’ After you have applied ColourGuard PLUS, be sure to allow at least 2 hours of direct sunlight for the pigment to absorb. If your lawn is in a shaded area you may need slightly longer. ColourGuard PLUS is a permanent colourant, so it will only disappear as your lawn grows. Once ColourGuard PLUS has dried, it will not run or fade after rain. It’s locked into the leaf blade until it grows out!
APPLY IN 5 EASY STEPS:
SHAKE BOTTLE WELL!
1. Attach your hose to the 2 Litre Ready To Use bottle.
2. Keep bottle upright during application. Spray evenly across your lawn, working methodically from one side to another.
3. When spraying near hard surfaces like paths and driveways, stand on the surface and spray the ColourGuard PLUS away from the surface onto your lawn. If you do accidently spray on surfaces, simply wash the colourant off immediately with hosed water.
4. Leave your lawn to dry for at least 2 hours afterwards (if in full sunlight), or longer if it is shady. Easy!
5. Water your lawn 2 to 3 days after application to wash off any excess.
PRECAUTIONS
• Do not apply to wet or dew affected grass
• Avoid footpaths, driveways and other hard surfaces
• Allow up to 24 hours before desired result
• Allow adequate time for lawn to dry before walking on or applying water
• It’s advisable to water well 2 to 3 days after application to wash off any excess.
IMPORTANT CLEANING INFORMATION
- For common hard surfaces like concrete, we recommend using a two to one mixture of white vinegar and bi-carb soda and scrubbing with a scrubbing brush. Leave this for 5 minutes or so and then remove with a clean cloth or hose it off.
- For tiles specifically, but also sealed concrete, one of the most effective methods is to scrub with lemon juice concentrate, using the same method.
- If the stain is on a porous hard surface or is being particularly stubborn you can use a dedicated concrete cleaner – If doing so, be sure to follow label rates and instructions to avoid damaging grout or concrete when using these products.
Due to the porous nature of some hard surfaces, some stains may not be removable, but should fade with time.
Unsealed Concrete or porous surfaces – Concrete Cleaner
Tiles or Sealed Concrete – Lemon juice, Vinegar & Bi-Carb Soda
SAFETY:
Keep out of reach of children. Avoid contact with eyes and skin. If contact occurs, flush with water and consult a doctor. May be harmful if swallowed. If accidental ingestion occurs consult a doctor.
See Material Safety Data Sheet below and additional information at lawnsolutionsaustralia.com.au or please call 1300 883 711. Lawn Solutions Australia is not responsible for any misuse of this product.